Kaiyi BR380JG-1E0 — CHECK AND ADJUSTMENT OF OUTLET CLEARANCE

SEN02305-01 30 Testing and adjusting Adjusting clearance in A (automatic) mode 1. Start the engine. 4. Set clearance adjustment selector switch (3) to position (A) (automatic). 2. Set fuel control dial (1) to the low idle (MIN) position. 5. Check that clearance adjustment monitor (D) of the machine monitor is set to (A) (automatic) mode, then input the OSS clearance (A) to be adjusted to the machine monitor in the follow- ing order. 1) Use UP switch (4) or DOWN switch (5) to move the cursor on the screen display to position (A). 3. Set mode selector switch (2) to INSPECTION (c) position. The machine monitor switches to the normal inspection screen. 2) Press input confirmation switch (6).

(A) starts flashing and numeral input window (B) is displayed at the top left of the screen. 3) Use UP switch (4) or DOWN switch (5) to increase or decrease the value on the dis- play and adjust to give the desired set value. The numerical value can be set in units of 1 mm in a range of 50 to 150 mm. If the UP switch (4) or DOWN switch (5) is kept pressed continuously, the set value will increase or decrease in units of 10 mm . 6 BR380JG-1E0