Kaiyi BR380JG-1E0 — CHECK AND ADJUSTMENT OF OUTLET CLEARANCE

SEN02305-01 30 Testing and adjusting 7. Adjust the clearance. 1) Use UP switch (4) or DOWN switch (5) to move the cursor on the screen display to position (C). 2) Press input confirmation switch (6) to complete the preparations. “|” lamp (C) flashes. 3) Press input confirmation switch (6) again to carry out the adjustment. “|” lamp (C) lights up. Adjusting clearance in M (manual) mode 1. Measure the present crusher outlet clearance to understand how much to increase or decrease the value to reach the target value for the clearance. 2. Start the engine. 8. “|” lamp (C) goes out to show that the clear- ance adjustment is completed. 3. Set fuel control dial (1) to the low idle (MIN) position.

10 BR380JG-1E0