Overview of NC Errors NC Errorcodes 34 Version: 1.1 Error(Hex) Error(Dec) Error type Description One of the parameterized checks has detected an exceeding of the dynamic limits (max. velocity, max. acceleration, max. deceleration or max. jerk) of the slave axis or a profile property (e.g. overshoot or undershoot in position or velocity) is not allowed. See also additional/further messages in the Windows Event Viewer and in the message window of the system manager. 42E0 17120 Parameter Invalid parameter The encoder generator parameter is not allowed. 42E1 17121 Parameter Invalid parameter The external (FIFO) generator parameter is not allowed.
42E2 17122 Function External generator is active The external generator cannot be started, as it is already active. 42E3 17123 Function External generator is not active The external generator cannot be stopped, as it is not active. 42E4 17124 Function NC block with auxiliary axis violates software limit switches of the group At least one auxiliary axis with active software end position monitoring has violated the limit switches. Therefore the geometric entry is denied with an error. 42E5 17125 Function NC block of Bezier curve (Bezier spline) type contains a singularity The Bezier curve (Bezier spline) has a peak, i.e.
at an inner point both the curvature and the magnitude of the velocity strive towards zero in such a way that the radius of curvature is infinite. The Bezier spline should be divided at exactly this point according to the "Casteljau algorithm". This preserves the geometry and eliminates the interior singularity. 42E7 17127 Parameter Value for dead time compensation not allowed The value for the dead time compensation in seconds for a slave coupling to an encoder axis (virtual axis) is not allowed. Value range: [0.0 ... 60.0] Unit: s 42E8 17128 Parameter Internal error GROUPERR RANGE NOMOTIONWINDOW _ _ Value range: [0.0 ... 1000.0] Unit: e.g.
mm/s 42E9 17129 Parameter Internal error GROUPERR RANGE NOMOTIONFILTERTIME _ _ Value range: [0.0 ... 60.0] Unit: s 42EA 17130 Parameter Internal error GROUPERR RANGE TIMEUNITFIFO _ _ Value range: (0.0 ... 1000.0] Unit: s 42EB 17131 Parameter Internal error GROUPERR RANGE OVERRIDETYPE _ _ Value range: [1, 2] Unit: 1 42EC 17132 Parameter Internal error GROUPERR RANGE OVERRIDECHANGETIME _ _ Value range: (0.0 ... 1000.0] Unit: s