beckhoff TwinCAT 2 Motion — 2.9 NC-PLC Errors

Overview of NC Errors NC Errorcodes 74 Version: 1.1 Error(Hex) Error(dec) Error type Description Monitoring of the deviation angle was activated during activation of tangential following (E TfErrorOnCritical1), _ and an excessively large deviation angle was detected in the current segment. 4B7A 19322 Function Reserved Reserved, currently not used.

4B7B 19323 Parameter Tangential following the radius of the current arc is too small 4B7C 19324 Parameter FB NciFeedTablePreparation _ pEntry is NULL 4B7D 19325 Parameter FB NciFeedTablePreparation _ the specified nEntryType does not match the structure type 4B7E 19326 Parameter ST NciMFuncFast and ST NciMFuncHsk _ _ The requested M-function is not between 0 and 159 4B7F 19327 Parameter ST NciDynOvr _ The requested value for the dynamic override is not between 0.01 and 1 4B80 19328 Parameter ST NciVertexSmoothing _ Invalid parameter. This error is generated if a negative smoothing radius or an unknown smoothing type is encountered.

4B81 19329 Parameter FB NciFeedTablePrepartion _ The requested velocity is not in the valid range 4B82 19330 Parameter ST Nci* _ invalid parameter Error numbers 0x4B90 .. 0x4B9F are used in the Tc3 MC2 AdvancedHoming-Lib (PLCopen Part 5: _ _ Homing Procedures): 4B90 19344 Parameter Drive type The determined drive type is not supported. 4B91 19345 Parameter Direction The direction is impermissible. 4B92 19346 SwitchMode The SwitchMode is impermissible. 4B93 19347 Mode The mode for the parameter handling is impermissible. 4B94 19348 Torque limits The parameterization of the torque limits is inconsistent.

4B95 19349 Lag error limit The parameterization of the position lag limit is impermissible ( 4B96 19350 Distance limit The parameterization of the distance limit is impermissible ( 4B97 19351 Saving parameters An attempt was made to back up parameters again, although they have already been backed up. 4B98 19352 Restoring parameters An attempt was made to restore parameters, although none have been backed up.