Overview of NC Errors NC Errorcodes 80 Version: 1.1 Error(Hex) Error(Dec) ErrorType Description 0x8147 33095 Parameter Invalid Coordinate Dimension. The dimension of the set coordinate interpretation does not meet the requirements. 0x8148 33096 Function Block Invalid Input Value. 0x8149 33097 Parameter Unsupported Dynamics for selected Group Kernel. 0x814a 33098 Parameter The programmed position dimension incompatible with the axes convention. 0x814b 33099 Function Block Path buffer is invalid. E.g. because provided buffer has invalid address or is not big enough. 0x814c 33100 Function Block Path does not contain any element.
0x814d 33101 Function Block Provided Path buffer is too small to store more Path Elements. 0x814e 33102 Parameter Dimension or at least one Value of Transition Parameters is invalid. 0x814f 33103 Function Block Invalid or Incomplete Input Array. 0x8150 33104 Function Block Path length is zero. 0x8151 33105 State Command is not allowed in current axis state. 0x8152 33106 State TwinCAT System is shutting down and cannot complete request. 0x8153 33107 Parameter Configured axes convention and configured axes do not match. 0x8154 33108 Initialization Invalid Number of ACS Axes. The number of ACS input axes does not match the number of ACS input axes expected by the kinematic transformation.
0x8155 33109 Initialization Invalid Number of MCS Data. The number of MCS input data does not match the number expected by the kinematic transformation. 0x8156 33110 Initialization Invalid Value Set for Kinematic Parameters. The numeric value set for the parameter does not reside within the respective definition range. 0x8158 33112 NC Programmin g The Given ACS Values Cannot be Reached. The given ACS values result in an invalid machine configuration. 0x8159 33113 NC Programmin g The Set Target Positions Cannot be Reached. The set target positions reside outside the admissible working space. 0x815d 33117 NC Programmin g Discontinuity in ACS axes detected.
0x8160 33120 NC Programmin g Circle Specification in Path is invalid. The specification of a circle segment in the programmed interpolated path (e.g. via MC MovePath) has an invalid or ambiguous _ description. Probably its center cannot be determined reliably. 0x8161 33121 NC Programmin g Maximum stream lines reached. The maximum number of stream lines is limited. Please refer to function block documentation for details. 0x8163 33123 Function Block Invalid First Segment. The corresponding element can only be analyzed with a well-defined start point. 0x8164 33124 Function Block Invalid auxiliary point. The auxiliary point is not well- defined.