Overview of NC Errors NC Errorcodes 9 Version: 1.1 Error(Hex) Error(Dec) Error type Description 4011 16401 Parameter Group identifier not allowed Either an unacceptable value (not 1...255) has been used, or a group that does not exist in the system has been named. 4012 16402 Parameter Axis identifier not allowed Either an unacceptable value (not 1...255) has been used, or an axis that does not exist in the system has been named. 4013 16403 Parameter Encoder identifier not allowed Either an unacceptable value (not 1...255) has been used, or a encoder that does not exist in the system has been named.
4014 16404 Parameter Controller identifier not allowed Either an unacceptable value (not 1...255) has been used, or a controller that does not exist in the system has been named. 4015 16405 Parameter Drive identifier not allowed Either an unacceptable value (not 1...255) has been used, or a drive that does not exist in the system has been named. 4016 16406 Parameter Table identifier not allowed Either an unacceptable value (not 1...255) has been used, or a table that does not exist in the system has been named. 4020 16416 Internal Missing process image There is no PLC-axis interface when creating an axis.
4021 16417 Internal Missing process image There is no axis-PLC interface when creating an axis. 4022 16418 Internal Missing process image There is no encoder-I/O interface when creating an axis. 4023 16419 Internal Missing process image There is no I/O-encoder interface when creating an axis. 4024 16420 Internal Missing process image There is no drive-I/O interface when creating an axis. 4025 16421 Internal Missing process image There is no I/O-drive interface when creating an axis. 4030 16432 Internal Coupling type not allowed The master/slave coupling type is not allowed. 4031 16433 Internal Axis type not allowed The type specification in the axis generation is inadmissible.
4032 16434 Parameter Unknown channel type The NC channel type is unknown. Known types are e.g. an NCI channel, a FIFO channel, etc. 4040 16448 Internal Axis is incompatible The axis is not suitable for the intended purpose. A rapid/slow traverse axis, for example, cannot function as a slave in an axis coupling. 4050 16464 Internal Channel not ready to operate