Topdon · 2 pp.
BTMobile Pros Quick Guide V2
Related manuals
Document text
SPECIFICATION Sp yee z TOPDON a eT aa Operating Voltage: 8V~16V Clamp Line Length: 556mm Operating Temperature: -10°C to 45°C (14°F to 113°F) Storage Temperature: -20°C to 75°C (-4°F to 167°F) (21.89 inch) Operating Humidity: -10°C~50°C,10%-60%RH (Non-condensing) Storage Humidity: -20°C~70°C,10%-80%RH (Non-condensing) Safety Protection: Reverse Polarity Protection CA CCA BCI MCA DIN 100-2000(A) 100-2000(A) 100-2000(A) 100-2000(A) 100-1400(A) GB IEC EN SAE JIS 30-200 (Ah) 100-1400(A) 100-2000(A) 100-2000(A) 26A17--245H52 Establish wireless communication between BTMOBILE PROS with your smart devices via Bluetooth 4.2. You can register with your valid email address, or skip the login procedure.
NOTE: We strongly recommend the registration for latest product news and timely technical assistance. 9:41 > $100% a GETTING STARTED Stepl PRODUCT DESCRIPTION Indicator Display Please scan the OR code or visit our offical website: https:// www-.opdon.com/products/btmobile-pros to download and install the APP. NOTE: Compatible with Android 4.4 smart devices, or newer. Green: Successful Battery Connection Blue: Successful Bluetooth Connection Red: Error. Over temperature, or over voltage ABOUT Thank you for purchasing TOPDON BTMOBILE PROS Battery Tester.
Designed to work on 12V batteries within the 100-2000 CCA range, TOPDON BTMOBILE PROS meets a variety of battery specifications including CCA, JIS, EN, DIN, SAE, IEC, etc., and also an effective detector to pinpoint the bad cell. It adopts the most advanced conductivity detection technology to effectively help maximize the performance of your 12V vehicles, giving valuable, easy-to-understand information about the vehicle battery health, alternator's charging, and starter’s cranking conditions. The built-in ExtraSafe protections against short circuit, reverse polarity, and over voltage allow the tester to safely connect to any battery.
Step3 Battery Measuring Standard & Range TEST RESULTS REFERENCE Step2 Connect the RED Alligator Battery Clamp to the (+) positive battery terminal, and connect the BLACK Alligator Battery Clamp to the (-) negative battery terminal. Make sure the battery terminals are clean and the clamps are securely attached to the correct terminals. pt (~ resister or create an account TEST RESULT: REFERENCE: INTERPRETATION: Good Battery SOH>=60%, SOC>=60% Good battery Bad Cell- Replace SOH =60% Bad battery. Need to replace ASR (RED) or (Black) Email Netter + Password Remember me Recharge-Retest SOH>=60%, SOC<60% Recharge battery, and retest Une ka Forgotten your password? (Step1) ‘SKIP THIS STEP (Step2)
IMPORTANT SAFETY INSTRUCTION Q: Can BTMOBILE PROS test the battery installed in the vehicle? A: Yes, it supports in-vehicle and out-of-vehicle testing. a: Battery Test Cranking Test Q: Is the test result accurate? A: Yes. Our BTMOBILE PROS features advanced conductance detection Pete Tread giving you accurate test results in seconds. Q: What batteries can BTMOBILE PROS work on? A: It works on 12V regular flooded, AGM Flat plate, AGM Spiral, GEL and Deep Cycle batteries, with CCA between 100 to 2000. Q: Is BTMOBILE PROS designed with any built-in protections? A: Yes.
lt offers peace of mind with extra-safe Reverse Polarity and Sparkproof protection, and easy operations even if you're new to battery testing. Step 1 BATTERY TYPE SELECTION Select Regular Flooded Step 2 SYSTEM STANDRAD e Step 3 SYSTEM CAPACITY Select v AGM Flat Plate AGM Sprial GEL Step 4 Select the options with guidance to run the battery test, cranking test, charging test, or battery system test, according to your actual needs, NOTE: Please turn off all electrical equipment prior to the battery testing operation. FCC Warnings: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits ABOUT ‘Thankyou for purchasing TOPDON BTMOBILE PROS Batory Teste Designed to work on 74 bataries within the 100-2000 CCA range, LE PROS meta a varety of battery specications ineluding COA, 8, EN DIN, SAE, IEG te, ond ala on afactiveetactor ‘to pinpoint the bad cll des the most uekanced conductivity detc ip rmstréze the performancs of our T2V & 24 V vehicles, siving 1 itiormalion about the vehicle bay hath eltemators charging, and starter’ cranking condlona Extra protections: agsinat short eeu, ron pole, _and over volage alow the tester to safely connect fo any batty.
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in Q:Can BTMOBILE PROS test 12V solar battery? A: If your solar battery bank is made up of lead-acid cells, then yes. accordance with the instructions, may cause harmful interference to radio Q: How do | confirm if my vehicle battery is bad or good? A:
The battery tester will display SOH (State of Health), SOC (State of Charge), CCA (Cold Cranking Ampere), Voltage, Internal Resistance, and Rating, with an intuitive test result of "GOOD" or “BAD” for your reference. If the internal resistance is too large, it indicates a broken battery. not occur in a particular installation. If this equipment does cause harmful Q: Can this battery tester estimate the remaining capacity of my battery? A: Yes.The battery tester will display SOC (State of Charge) to express as a percentage of your battery's rated capacity, a measure of its condition to assess the potential energy.
Note that a decent SOC (State of Charge) doesn’t mean the battery is in good condition. You need to refer to your battery's actual CCA Value and Internal Resistance for further analysis. PACKAGE LIST UESR MANUAL *1 communications. However, there is no guarantee that interference will interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. C€ FE RoHS —Consult the dealer or an experienced radio/TV technician for help. DOWNLOAD FREE APP All information in this manual is based on the latest information available at the time of publication and no warranty can be made for its accuracy or completeness. TOPDON reserves the right to make changes at any time without notice. For more information, please go to www.topdon.com. Website www.topdon.com Hotline Email support@topdon.com (+1)833-629-4832