Comparison between ES2 Editions May 2011

Instantly executes 2 New Feature
Change the active position of hardware high-speed 101 Count down 99 100 Active position Applicable instructions  DHSCS, DHSCR, DHSZ 101 Count up Example: set value for comparison: 100 100 Now  Applicable counters  C243 ~ C254 99 101 Count down 99 100 Active position Active position comparators 101 Count up Before  100 99 Delta Confidential

Page 2

3 Applicable instructions  high speed output instructions
High Speed Output Executes at High Level Position Faster Ѕ cycle time Output executes Now  New Feature Applicable outputs  Y0, Y2 PLSY, PLSR, DDRVI…etc. Output executes Before  Delta Confidential

Page 3

4 previous mode is switched back. This mode is suitable for a slow- reacting control system which allows users to change MV without Manual mode K8  The user sets the output value (MV) and the K0~K2, PID executes with the stored value. The mode is suitable Manual mode K7  The user sets the output value (MV) while integral value and store it. When the user switches back to mode system will convert the MV into a corresponding accumulated PID operation is running. The set value activates when the for a fast-reacting control system, e.g. pressure control. New Feature interrupting the normal PID operation. Delta Confidential

Page 4

5 Applicable for timer interrupt application on a high accuracy
RTC is latched for approx. 1 week after power off Shares M1057 (Disable time interrupts) with I705~I799 A new set of timer interrupt with time base 0.1ms. New Feature
Timer Interrupt I805 ~ I899 Set range: 0.5ms ~ 9.9ms demand Delta Confidential

Page 5