Configuring Bidirectional Forwarding Detection Configuring BFD Support for OSPF for All Interfaces Command or Action Purpose Step 3 router ospf process-id Example: Device(config)#router ospf 4 Specifies an OSPF process and enters router configuration mode. Step 4 bfd all-interfaces Example: Device(config-router)#bfd all-interfaces Enables BFD globally on all interfaces that are associated with the OSPF routing process. Step 5 exit Example: Device(config-router)#exit (Optional) Returns the device to global configuration mode. Enter this command only if you want to perform Step 7 to disable BFD for one or more interfaces. Step 6 interface type number Example:
Device(config)#interface fastethernet 6/0 (Optional) Enters interface configuration mode. Enter this command only if you want to perform Step 7 to disable BFD for one or more interfaces. Step 7 ip ospf bfd [disable] Example: Device(config-if)#ip ospf bfd disable (Optional) Disables BFD on a per-interface basis for one or more interfaces that are associated with the OSPF routing process. Note You should use the disable keyword only if you enabled BFD on all the interfaces that OSPF is associated with using the bfd all-interfaces command in router configuration mode. Step 8 end Example: Device(config-if)#end Exits interface configuration mode and returns the router to privileged EXEC mode.
Step 9 show bfd neighbors [details] Example: Device#show bfd neighbors detail (Optional) Displays information that can help verify if the BFD neighbor is active and displays the routing protocols that BFD has registered. Step 10 show ip ospf Example: Device#show ip ospf (Optional) Displays information that can help verify if BFD for OSPF has been enabled. Configuring Bidirectional Forwarding Detection 14