EPSON — Cleaning the Peeler (Peeler Model Only)

Chapter3 Handling Cleaning the Peeler (Peeler Model Only) If labels, paper dust, or adhesive has adhered to the peeler, the print quality may decline. To maintain good print quality, it is recommended to clean the peeler every day. Clean the peeler following the procedure below. • Do not use benzine, thinner, trichloroethylene, or ketone based solvent. Doing so may deform or damage the plastic and rubber parts. • Do not spray or allow alcohol to drip directly on the printer. If alcohol gets inside the printer, it may short-circuit the electronic components or cause deterioration or damage to the components. • After cleaning, wipe with a dry cloth so that no alcohol remains on the surface.

• Do not connect the power plug or operate the power supply until the alcohol has completely dried. CAUTION 1 Turn off the printer, and unplug the power cable. 2 Open the peeler cover. If paper has been loaded, remove it. ( "How to Remove Paper (For the Peeler Model)" on page 68 ) 3 Clean the roller using a cotton swab moistened with alcohol. Completely remove dirt from the roller. 302