Simplicity on the Worksite Solutions Guide for FAQs: E5CC/E5EC Using ON/OFF Control You set this parameter in the Adjustment Level. The parameter is set to 1.0 ° C by default. Turn ON the power supply. 1 Operating Display Adjustment Level ← l.adj (L.ADJ) will be displayed to show that the Adjustment Level has been entered. The four numeric digits that identify the product code are displayed. Press the (Level) Key for less than 1 second. Using ON/OFF Control Change the parameter with the Key . 2 Adjustment Level ← Default setting is 1.0 (1.0°C). Press the (Mode) Key ← hys (HYS): Indicates the Hysteresis parameter. several times to display hys (HYS). Set the parameter with the Keys.
3 Adjustment Level Change the set value with the (Up and Down) Keys. (When finished, press the (Level) Key to return to the operation display.) Simplicity on the Worksite Solutions Guide for FAQs: E5CC/E5EC 2-3 3 Setting the Hysteresis