Simplicity on the Worksite Solutions Guide for FAQs: E5CC/E5EC Using ON/OFF Control You set this parameter in the Initial Setting Level. The parameter is set to ON/OFF control by default. Turn ON the power supply. 1 Operating Display Using ON/OFF Control 2 Press the K ey for at least 3 seconds. Initial Setting Level Press the (Level) Key for at least 3 seconds. ← Flashes 3 times. ← in-t (IN-T) will be displayed to show that the Initial Setting Level has been entered. Change the parameter with the Key . 3 ← cntl (CNTL): Indicates the Control Method parameter. ← Default setting is onof (ONOF): ON/OFF control. Initial Setting Level Press the ( Mode) Key several times to display cntl (CNTL).
If pid (PID control) is displayed, press the ( Down) Key to change to onof (ONOF) (ON/OFF control). You set this parameter in the Initial Setting Level. The parameter is set to reverse operation by default. Change the parameter with the Ke y. 1 Initial Setting Level ← orev (OREV): Indicates the Direct/Reverse Operation parameter. Press the ( Mode) Key several times to display orev (OREV). ← Default setting is or-r (OR-R): Reverse operation. or-r (OR-R): Reverse operation (default) or-d (OR-D): Direct operation Change the set value with the (Up and Down) Keys.
(When finished, press the (Level) Key for at least 1 second to return to the operation display.) Simplicity on the Worksite Solutions Guide for FAQs: E5CC/E5EC 2-2 S tep 2 Setting ON/OFF Control Parameter s 1 Setting ON/OFF Control 2 Setting Direct or Reverse Operation