Specifications and Regulatory Information Modem Reference Information S-Registers (3Com) 188 Corporate Evaluator’s Guide Command Function (3Com) &S1 Data Set Ready (DSR) signals that the modem is ready to send data &Un Set minimum link rate (bps):
0=Variable, 1=300 , 2=1200, 3=2400, 4=4800, 5=7200, 6=9600, 7=12000, 8=14400, 9=16800, 10=19200, 11=21600, 12=24000, 13=26400, 14=28800, 15=31200, 16=33600, 17=28000, 18=29333, 19=30666, 20=32000, 21=33333, 22=34666, 23=36000, 24=37333, 25=38666, 26=40000, 27=41333, 28=42666, 29=44000, 30=45333, 31=46666, 32=48000, 33=49333, 34=50666, 35=52000, 36=53333, 37=54666, 38=56000, 39=57333 &W0 Store user profile 0 to memory &W1 Store user profile 1 to memory &Zn=s Store phone number (n= 0,1,2,3) &Zn?
Display phone number Register Function (3Com) Range Default S0 Number of rings before the modem auto-answers a call (0 means auto- answer is disabled and manual answer is in effect) 0-255 0 rings S1 Counts and logs the number of rings 0-255 0 rings S2 Designates the ASCII character used to indicate an escape character 0-127 43 S3 Designates the ASCII character used for carriage returns 0-127 13 S4 Designates the ASCII character used for line feeds 0-127 10 S5 Designates the ASCII character used for backspaces 0-127 8 S6 Dial tone wait time; if AT command X is set to X2 or X4, the modem ignores this register and dials as soon as it detects a dial tone (seconds) 2-255 3 S7 Carrier wait time (seconds) 1-255 60 S8 Pause in dialing time (comma in dialing string) (seconds) 0-255 2 S9 Carrier detect validation time (1/10 second) 1-255 6 S10 Delay time between lost carrier and hang up; if S10=255, the modem will not hang up when the carrier is lost; dropping DTR hangs up the modem (1/10 second) 1-255 7 S11 Duration of the touchtone dialing tone spacing (in milliseconds) 50-255 70 S12 Guard time for the escape code (1/50 second) 0-255 1 S13 Bitmapped register.
1=Reset on DTR loss 2=Reduced non-ARQ transmit buffer 4=Set DEL=backspace 8=Do DS0 on DTR 16=Do DS0 on Reset 128=Escape code hangup 0-255 0 S15 Bitmapped register. 1=MNP/V.42 disabled in V.22 2=MNP/V.42 disabled in V.22bis 4=MNP/V.42 disabled V.32, V.34 8=Disable MNP handshake 16=Disable MNP level 4 32=Disable MNP level 3 64=Unusual MNP incompatibility 128=Disable V.42 136=Disable V.42 detection phase 0-255 0 S16 Bitmapped test register. 2=Dial test 2 0