Specifications and Regulatory Information Modem Reference Information Corporate Evaluator’s Guide 189 Register Function (3Com) Range Default S18 Test timer for AT command &T - when AT&T=0, the timer is disabled (seconds) 0-255 0 S19 Duration for inactivity timer; S19=0 disables the timer (minutes) 0-255 0 S21 Sets error correction break length (1/100 second) 0-255 1 S22 Designates the ASCII character code for XON 0-127 17 S23 Designates the ASCII character code for XOFF 0-127 19 S25 DTR debounce time indicator (1/100 second) 0-255 0 S27 Bitmapped register.
1=V.21 mode 2=Disable TCM 4=Disable V.32 8=Disable 2100Hz 16=Enable V.23 fallback 32=Disable V.32bis 128=Software compatibility mode 0 S28 V.32 Handshake Time (1/10 second) 0-255 8 S29 V.21 Answer Mode Fallback Timer (1/10 second) 0-255 20 S32 Connection bitmapped operations. 1=V.8 call indicate enable 2=Enable V.8 mode 8=Disable V.34 modulation 16=Disable V.34+ modulation 32=Disable X2 modulation 64=Disable V.90 modulation 2 S33 V.34 and V.34+ connection setup bitmapped control flags.
1=Disable 2400 symbol rate 2=Disable 2743 symbol rate 4=Disable 2800 symbol rate 8=Disable 3000 symbol rate 16=Disable 3200 symbol rate 32=Disable 3429 symbol rate 128=Disable shaping 0 S34 V.34 and V.34+ connection setup bitmapped control flags 16=Disable nonlinear coding 32=Disable transmit level deviation 64=Disable preemphasis 128=Disable precoding 0 S38 Delay before forced hangup (optional) (seconds) 0-255 0