Mitsubishi — 3.8.2.3 Set Value Button

Chapter 3 Creating and Editing Screens Revision May, 2010 3-103 Property Description of Set Value Buttons Range Setting Data Format It provides different kinds of data format for different data length: Word Double Word 1. BCD 1. BCD 2. Signed BCD 2. Signed BCD 3. Signed Decimal 3. Signed Decimal 4. Unsigned Decimal 4. Unsigned Decimal 5. Hex 5. Hex 6. Binary 6. Binary 7. Floating Integral Digits Fractional Digits Determine the digit number of integer and decimal fraction. The digit number is not a real digit number value. It is only the display format. The digit number will be a real decimal number only when the data format is selected as Floating.

Press OK when you have input the minimum and maximum value, and then HMI will examine the value by referring to the selected data length, data format, and integral and fractional digits. User Security Level Use this option to set the user priority for pressing this element. Only the priority that is equal to or higher than the current setting can use this element. Set Low Security Use this option to force the current priority to be the lowest after the button is pressed. This can prevent the misoperation made by the user (operator).

InterLock Address InterLock Level When InterLock Address is set to be ON or OFF (this is determined by the property of “InterLock Level”), this button can be enabled. Before Execute Macro If this option is set, when the user presses the button, the system will execute the command of this macro first and then perform the operation of this button. But, if the state of the button is not triggered by pressing the button (via macro or external signal), the command of this macro will not be executed. After Execute Macro If this option is set, when the user presses the button, the system will perform the operation of this button first and then execute the command of this macro.

But, if the state of the button is not triggered by pressing the button (via macro or external signal), the command of this macro will not be executed. Enable the confirm window When this option is set, an Action Confirm dialog box will appear to prompt the user everytime when the button is pressed.