Chapter 3 Creating and Editing Screens 3.8.2.4 Set Constant Button 3-104 Revision May, 2010 Property Description of Set Value Buttons Info the overrange message When this option is set, an Error dialog box will appear to prompt the user the input value has exceeded the limit of the range setting. Invisible Address When this option is set to On, this button element will be invisible. X Used to set X coordinate Y Used to set Y coordinate Width Used to set the element width Height Used to set the element height Property Description of Set Constant Buttons After pressing this button on the screen, HMI will send the specified constant value to PLC corresponding register.
It has the same function as Set Value button. The user can also specify the trigger mode to trigger the designated PLC address before or after writing the setting value. Write Address The address can be internal memory or the controller address.
(Please refer to Table 3-8-2 Property Description of General Buttons.) Text Text Size Font Text Color The user can set the text, text size, font and text color provided by Windows® to determine the text display on the element (Please refer to Table 3-8-2 Property Description of General Buttons.) Bank (Picture Bank) Picture Name (Please refer to Table 3-8-2 Property Description of General Buttons.) Transparent Effect Transparent Color (Please refer to Table 3-8-2 Property Description of General Buttons.) Foreground Color Style (Please refer to Table 3-8-2 Property Description of General Buttons.)