Mitsubishi — 3.8.4.2 Differential

Chapter 3 Creating and Editing Screens 3.8.4.2 Differential 3-122 Revision May, 2010 Property Description of Normal Bar Elements Low Region Color High Region Color This option is available and displayed in the property table only when the “Ranges” option in the Detail dialog box is selected. If the user sets the low limit value is 30 and the color of low limit region is in green, and then set the high limit value is 70 and the color of high limit region is in red, the bar element will be shown as the figures below (The min. & max. input value is 0 and 100 respectively.):

When the value is 20 When the value is 50 When the value is 80 X Used to set X coordinate Y Used to set Y coordinate Width Used to set the element width Height Used to set the element height Property Description of Differential Bar Elements HMI reads the value of the corresponding PLC specific address (register). Subtract the setting standard value from this read value and the user has a differential value. Then, the user can convert the differential value to differential bar element and then display it on the screen. Read Address The address can be internal memory or the controller address.

(Please refer to Table 3-8-2 Property Description of General Buttons.) Text Text Size Font Text Color The user can set the text, text size, font and text color provided by Windows® to determine the text display on the element (Please refer to Table 3-8-2 Property Description of General Buttons.) Border Color Set the border color of the element Foreground Color Background Color It is used to set the foreground and background color of the deviation bar element. For example, the foreground color of the following example bar element is green and its background color is yellow.