US Army Materiel Command AMCP 706-250 — Engineering Design Handbook: Guns Series — Guns-General

Downloaded from https://www.everyspec.com having a nonperforated liner (see bottom illustra- tion of Figure 3-2). The round is supported at its forward and rear ends in alignment with the tube bore, in a chamber considerably larger in diameter than the case. Oil firing a portion of the propellant gas is driven through the perforations of the case, into the annular space between the case and cham- ber side wall, and thence* through orifices in the chamber rear wall to the atmosphere behind the weapon. The breechblock is a sectored and threaded cylindrical plug that closes the central cartridge insertion opening in the rear of the cham- ber and blocks rearward movement of the case.

It houses the firing pin in a central bore and carries the immediately related firing mechanism parts. The breechblock is supported in an arm hinged to lugs on the exterior of the chamber forging and is swung rearward and away from the gun axis in opening. An extractor hook carried in one side of the block extracts the case as the breech is opened. The clearance channels in breechblock and chamber are contoured to form gas discharge vents when the breech is closed and locked. The vents are in- clined slightly from a normal through the rear wall, so the reaction from the discharged gases will counteract the rotating force exerted on the rifled tube by the moving projectile.

Opening and closing of the breech is accomplished manually by means of an operating lever fulcrumed at the breechblock hinge pin and suitably linked through the breech- block supporting arm to effect rotation and swing- ing motions of the breechblock in the proper se- quence. An alternative arrangement for recoilless operation utilizes a chamber fitting the cartridge case throughout its length, rearward discharge of the necessary portion of the propellant gases being effected through the base of the cartridge and a nozzle centrally located in the gun breech.

A permanent or fixed closure is a structurally closed breech that remains closed throughout gun operation, though it may be removable for mainte- nance or repair. It may be obtained by securing a plug or cap in or on the rear end of the bored tube.. The .round of ammunition is necessarily inserted through the muzzle. In present practice, a percussion primer is fixed, in the round, and a forward projecting pin or stud is supported in the breech structure, aligned with the primer.

The pin may be fixed, in which case the primer is initiated by impact when the round drops to the breech (drop fire); or the pin may be retractable, spring driven, trigger- or lever-operated, to permit a time interval between loading and firing. In some experimental weapons, a spring-actuated pin with a locking device provides an option between drop firing and lever firing. Some early designs used a small vent hole for ignition by fuse or heated rod. Formerly widely used, permanent closures at present appear in only relatively small muzzle loading smooth-bore mortars, for use with the noncased type of semifixed ammunition. 3-5.2.1 Permanent Closures 3-5.2.2.

Mobile Closures The numerous advantages of breech loading in- duce the use of a movable closure, i.e., one operable to close for containment of pressure while the round is fired and to open for removal of any residual ammunition components and insertion of the next round. The mechanism for opening and closing, termed the breech mechanism, is considered to include any necessary cartridge case extraction mechanism and firing mechanism. While a wide variety of mechanisms have been devised for closure and the related functions, the majority may be appropriately considered as employing either of two types of action:

one in which the closing or opening is accomplished principally by moving the closing member forward to or into the chamber opening; or one in which closing or opening is effected principally by moving the closing member at right angles to the chamber axis, to cover or uncover the chamber opening. For either of these methods, the closure is usually supported on a major gun component known as the breech ring (cannon) or the receiver (small arms).

These terms denote a principal unit of gun construction that is joined to the rear of the tube or barrel for 3-5.2 Closed Breech In order to impart to the projectile the greatest possible kinetic energy from a given charge of propellant, it is usual practice to provide for com- plete closure of the breech of the gun, so as to con- fine the hot propellant gases behind the projectile until the latter is expelled. Various means and methods are employed for breech closure, in ac- cordance with the functioning and operating char- acteristics required. Closures are either permanent or mobile.