US Army Materiel Command AMCP 706-250 — Engineering Design Handbook: Guns Series — Guns-General

Downloaded from https://www.everyspec.com CHAPTER 6 GUN DESIGN PROBLEMS Chapters 2 and 3 indicate substantial differences between guns for Army purposes, in size, type of construction and mechanism, and method of opera- tion. The extent of size and weight differences is illustrated by the following »tabulation of charac- teristics of three guns of current design.

64 Similarity and Variety of Design 6-2.1 Energy Imparted to Projectile Since the bore and chamber of the gun constitute the confined space in which the propellant expands to drive the projectile through the tube and expel it from the muzzle, the form, dimensions, and neces- sary strength of the tube and chamber structure are primarily determined by the shape and dimen- Weapon Pistol (semiautomatic) Carbine Heavy Cannon (280mm) Length Bore Diameter Weight Weight of Projectile 8% in 2 ft liy 2 in 45 ft 0.45 in 0.30 in 11.00 in 21/2 lb 51/2 lb 21 tons 231 grains 110 grains 6001b Variations in structure and mechanism, aside from mere size and weight, stem from differences in type of projectile to be, fired, length and height of trajectory, required rate of fire, and type of mount.

sions of the projectile and the energy required to propel it to the target in the desired manner. The basic approach to design is summarized as follows: (1) To the known requirements for projectile flight (such as distance, time of flight to target, velocity at target, type of trajectory) application can be made of the calculated effects of gravita- tional and air resistance forces during flight to deduce the required initial velocity of the projectile (muzzle velocity). The indicated differences involve no departure from the basic definition of a gun given in Chapter 2, but emphasize the wide range of designs result- ing from variations in the factors of the design problem.

Each weapon presents the combined so- lutions of a number of problems posed by per- formance, operation, logistics, and psychological considerations applying to a gun intended for a specific use. (2) From considerations of trajectory, ve- locity, air forces, and projectile characteristics, the rotational velocity necessary for the desired degree of projectile stability in flight can be determined. The combination of linear and rotational velocities will yield the appropriate angle of rifling. 6-2 Problem Elements Several of the numerous factors affecting the solution of the design problem are identified below, with indications of their significance in effecting a solution.

The discussion does not necessarily in- clude all possible factors, but introduces basic con- siderations essential to military gun design. (3) Considerations of bore (projectile) diame- ter, weight of projectile, and anticipated energy losses in the gun and propellant enable determina- tion of a combination of chamber size, bore length, and propellant charge that will effect the necessary pressures on the projectile, during its passage