Downloaded from https://www.everyspec.com SWhen loads are tangent, equations are ob- ) tained by superimposing the expressions for their horizontal and vertical components. w M = moment at the x-axis M = moment at the y-axis CONDITION (a) Me = moment at the load D= diaietral deflection on x-axis AD. = diametral deflection on y.axis w W I = moment of inertia of ring cross section E = modulus of elasticity Mi R. = mean radius of ring W = concentrated ring load W M W Positive deflections indicate increase in di- Me ameter. Condition (a): four equal tangential loads symmetrical about the x- and y- axes. My RRI . WR.
i[0 (1 CONDITION (b) i( M, = WR., + (cos -1) (22) AD, = R a +0cos0- 2sin 0 (23) w AD= WR r(40 2) +2cos#+(8 - sin ] (24) Condition (b): four equal and parallel chordal loads symmetrical about the x- and CONDITION c) M M, YVW mL (sin o - U (25) I y-axes. M, WRm [ 2 (0 sin e + cos 0) - sin 0j (26) Me = M, (27) WR_ [4 (0 sin a + cos0) - sin20 - 1] MY (28) ,AD. - -(0 sinc 0+cos 0) C 7 2. Recoil Mechanism Attachment Bracket e I e 51. The recoil mechanism cylinder may be w w tached to the sleigh or cradle by brackets, one integral with the sleigh or it may be at- Figure 21. Equivalent Ring Loading Conditions at the rear near the trunnions, the other farther 20-