Hantek — DPO7000 UserManual

To Trigger the Oscilloscope EN Figure 8.10 Setup/Hold Trigger Click on [Trig Menu] in the button area to open the trigger menu. 1. Type: Click on the Type menu label and select " Setup/Hold " to set the trigger for establishing hold. After selecting the trigger type, the current trigger setting information (including trigger type, trigger source, and trigger level) will be displayed at the top of the screen, and it will change with the change of the trigger setting. 2. Clock source: Click on the SCL menu tab and select CH1-CH4 or EXT as the signal source. Only by selecting the channel that has been connected to the signal as the trigger source can stable triggering be obtained. 3.

Slope Type: DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 80