Hantek — DPO7000 UserManual

To Trigger the Oscilloscope EN Click on the Baud menu tab and select the preset rate from the pop-up sub options. 5. ID: Click on the ID menu tab and set the ID value by rotating the multi-functional knob V0 or the pop-up numeric keyboard. 6. Data: Click on the Data menu tab and set Data 1, Data 2, Data 3, and Data 4 by rotating the multifunctional knob V0 or the pop-up numeric keypad. 8.6.14 CAN Trigger (Option) This oscilloscope can be triggered at the beginning of the CAN signal frame, at a specified type of frame (such as remote frame, data frame, etc.), or at a specified type of error frame. The format of the CAN bus data frame is shown in the following figure.

Figure 8.13 Data Frame Format of the CAN Bus Click on [Trig Menu] in the button area to open the trigger menu. Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 85