To Trigger the Oscilloscope EN full duplex, synchronous communication bus. When using SPI trigger, it is necessary to specify the serial clock line (CLK) and serial data line (MISO). Figure 8.14 Sequential Chart of SPI Bus Click on [Trig Menu] in the button area to open the trigger menu. 1. Type: Click on the Type menu label and select "SPI trigger" to set the SPI trigger. After selecting the trigger type, the current trigger setting information (including trigger type, trigger source, and trigger level) will be displayed at the top of the screen, which changes with the trigger setting. 2. Source:
Click on the CLK and MISO menu labels and select CH1-CH4 or EXT to specify the signal source for the serial clock line (CLK) and serial data line (MISO), respectively. Only by selecting the channel that has been connected to the signal as the trigger source can stable triggering be obtained. 3. Slope type: Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 87