Hantek — DPO7000 UserManual

To Set the Sample System EN Figure 7.4 Waveforms after Averaging 7.2.3 Peak In this mode, the oscilloscope collects the maximum and minimum values of the signal within the sampling interval to obtain the envelope of the signal or narrow pulses that may be lost. Using this mode can avoid signal aliasing, but the displayed noise is relatively high. In this mode, the oscilloscope can display all pulses at least as wide as the sampling period. 7.2.4 High Resolution This mode adopts a supersampling technique that averages adjacent points of the sampled waveform, reducing random noise on the input signal and producing a smoother waveform on the screen.

Usually used when the sampling rate of a digital converter is higher than the storage rate of the acquisition memory. Note: The averaging method used in "average" and "high resolution" modes is different, with the former being "multiple sample averaging" and the latter being "single sample averaging". DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 52