Hantek — DPO7000 UserManual

To Trigger the Oscilloscope EN ⚫ != (Not equal to time value): Only when the positive or negative pulse width of the input signal is not equal to the set pulse width can it be triggered. ⚫ > (greater than the time value): Only when the positive or negative pulse width of the input signal is greater than the set pulse width can it be triggered. For example, for a positive pulse, if t (actual pulse width) is set to>100ns, the waveform is triggered. ⚫ input signal is less than the set pulse width can it be triggered. For example, for a positive pulse, if t (actual pulse width) is set to waveform is triggered. 5. Width:

Click on the Width menu tab and select the multi-functional knob V0 to set the trigger release or the pop-up numeric keyboard to directly set the trigger release. 6. Holdoff: Click on the Holdoff menu tab, and set the trigger suppression by selecting the multi-functional knob V0 or directly setting the trigger suppression with the pop-up numeric keyboard. 8.6.3 Video Trigger Video triggering can be used to capture complex waveforms of most standard analog video signals and high-definition video signals. The trigger circuit can detect the vertical and horizontal intervals of the waveform and generate a trigger based on the selected video trigger setting.

This series of oscilloscopes supports NTSC (National Television Standards Committee) and PAL. Click on [Trig Menu] in the button area to open the trigger menu. Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 65