Hantek — DPO7000 UserManual

To Trigger the Oscilloscope EN 1. Type: Click on the Type menu tab, select "Video", and set the trigger settings. After selecting the trigger type, the current trigger setting information (including trigger type, trigger signal source, and trigger level) will be displayed at the top of the screen, which changes with the trigger setting. 2. Source: Click on the Source menu tab to select sources such as CH1, CH2, CH3, CH4. 3. Polarity: Click on the Polarity menu tab to select either positive or negative polarity. ⚫ Positive polarity: triggered when the positive polarity pulse width of the signal is set. ⚫ Negative polarity: triggered when the signal negative polarity pulse width is set. 4.

Standard: Click on the Standard menu tab and select the desired video standard. The video standards supported by this series of oscilloscopes include NTSC, PAL/SCEAM, 480p/60Hz, and other video standards. Table 8.1 Video Standard DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 66 Video Standard Frame Frequency Scan Type TV Scan Line NTSC 30 Interlaced Scan 525