Hantek — DPO7000 UserManual

To Trigger the Oscilloscope EN 5. Time: Click on the Time menu tab and set the trigger release by selecting the multi-functional knob V0 or directly set it on the pop-up numeric keyboard. 6. Level Select: Click on the Level Select menu tab, and the level selections are: Level A, Level B, and Level AB. 7. Holdoff: Click on the Holdoff menu tab, and set the trigger suppression by selecting the multi-functional knob V0 or directly setting the trigger suppression with the pop-up numeric keyboard.

8.6.5 Overtime Trigger Triggered when the time interval ( △ T) from the rising edge (or falling edge) of the input signal to the end of the adjacent falling edge (or rising edge) through the triggering level is greater than the set timeout time. As shown in the following figure: Figure 8.6 Overtime Trigger Click on [Trig Menu] in the button area to open the trigger menu. Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 69