To Trigger the Oscilloscope EN B (edge B) meets the preset time limit, the oscilloscope triggers, where edge A and edge B must be adjacent edges. Figure 8.9 Delay Trigger Click on [Trig Menu] in the button area to open the trigger menu. 1. Type: Click on the Type menu label and select "Delay Trigger" to set the delay trigger. After selecting the trigger type, the current trigger setting information (including trigger type, trigger source, and trigger level) will be displayed at the top of the screen, which changes with the trigger setting. 2. Source A and Source B: ⚫ Source A: Click on the menu label of Source A and select CH1-CH4 or EXT as the trigger source for Source A.
Only by selecting the channel that has already been connected to the signal as the source can stable triggering be obtained. ⚫ Source B: DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 78