Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming 11. When M1071 = ON, the unit of Y3 output pulse is 100μs, when M1071 = OFF, the unit is 1ms. 12. When M1116 is ON, M1112 and M1113 do not work. The time unit of the pulse output through Y0 and Y2 is 1μs. DVP-ES2 version 3.00/SS2 version 2.80/SA2 version 2.60/SE version 13. When M1117 is ON, M1070 and M1071 do not work. The time unit of the pulse output through 2.60/SX2 version 2.40 support this function. Y1 and Y3 is 10μs. DVP-ES2 version 3.00/SS2 version 2.80/SA2 version 2.60/SE version 2.60/SX2 version 2.40 support this function. 14. If M1116 for DVP-SS2 is enabled, the minimum pulse output width should be larger than 20.

Otherwise, due to the limitations on the hardware bandwidth of Y0 and Y2, the output result is not the correct time width. Program Example: When X0 = ON, Y1 output the pulse as shown X0 opposite. When X0 = OFF, output Y1 turns OFF. t=1000ms Output Y1 T=2000ms Note: 1. Flag description: M1070: Switching clock pulse of Y1 for PWM instruction (ON:100 us, OFF: 1ms) M1071: Switching clock pulse of Y3 for PWM instruction (ON:100 us, OFF: 1ms) M1112: Switching clock pulse of Y0 for PWM instruction (ON:10 us/100µs for SE; OFF: M1113: Switching clock pulse of Y2 for PWM instruction (ON:10 us, OFF: 100 us) 100 us/1ms for SE) M1116:

If M1116 is ON, the time unit of the pulse output through Y0 and Y2 is 1μs. M1112 and M1113 do not work. M1117: If M1117 is ON, the time unit of the pulse output through Y1 and Y3 is 10μs. M1070 and M1071 do not work. 2. Special D registers description: D1030 PV of Y0 pulse output (Low word) D1031 PV of Y0 pulse output (High word) D1032: Low word of the present value of Y1 pulse output D1033 High word of the present value of Y1 pulse output D1336 PV of Y2 pulse output (Low word) D1337 PV of Y2 pulse output (High word) D1338: Low word of the present value of Y3 pulse output. D1339: High word of the present value of Y3 pulse output. 3-146 PWM K1000 K2000 Y1 1