DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming Execution of the mask function (use Y0 as an example) Frequency Target frequency start/end frequency D1340 Pulse # D1026, D1027 Pulse number to end for masking in the front D1100, D1101 Pulse number to start for masking in the back Alignment mark function can be done in the sections of ramp-up, rump-down and speed. 6. Adding fixed slope function for CH0 and CH1 Available for the followings Y0 and Y2 relative parameters for fixed slope function: The frequency for the normal slope is defined by the frequencies of starting, ending and the target as well as the time of ramp-up and down. See the black line for reference.
3-154 External interrupts X4 External interrupts X4 Invalid Waiting for external Invalid interrupts X4 y ES2/EX 12SA2/ Series ES2-C ES2-E SS2 26SE 28SA2 2 SX2 Firmware V3.28 V3.28 V1.00 V2.82 V3.24 V2.0 V3.0 version Output Flag for fixed slope Special device for the maximum frequency Y0 M1604 D1410, D1411 Y2 M1605 D1412, D1413