DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming Example program of SV ramp up function: M1002 M0 T0 D1 D0 > D1 D0 D1 D0 = M10 > D0 D1 M12 M0 Application 2: Speed control system and pressure control system work individually (use diagram of Example 2) Control purpose: After the speed control operates in open loop for a period of time, adding pressure control system (PID instruction) to perform a close loop control. Control properties: Since the speed and pressure control systems are not interrelated, we have to structure an open loop for speed control first following by a close loop pressure control.
If users afraid that the pressure control system changes excessively, consider adding the SC ramp-up function illustrated in Application 1 into this control. See the control diagram below. 3-270 MOV K10 D3 TMR T0 D3 RST T0 MOV K50 D2 MOV K-50 D2 MOV K0 D2 ADD D2 D1 D1 CMP D2 K0 M10 MOV D0 D1 MOV D0 D1 PID D1 D1116 D10 D5