Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming API 281~ 286 Operands: S 1 : Source device 1 S 2 : Source device 2 Explanations: 1. This instruction compares the content in S 1 and S 2 . Take “FAND =” for example, if the result is “=”, the continuity of the instruction is enabled. If the result is “≠”, the continuity of the instruction is disabled. 2. The user can specify the floating point value directly into operands S 1 and S 2 (e.g. F1.2) or store the floating point value in D registers for further operation. 3. FAND ※ instruction is used for serial connection with contacts. Program Example:

When X1 is OFF and the content in D100(D101) is not equal to F1.2, Y21 = ON and latched. X1 3-516 Mnemonic Operands Function Controllers FAND※ Floating Point Contact Type Comparison AND※ ES2/EX2 SS2 SA2 SX2 SE Type OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F FAND※: 9 steps S 1 * * * S 2 * * * PULSE 16-bit 32-bit ES2/ EX2 SS2 SA2 SE / SX2 ES2/ EX2 SS2 SA2/ SE SX2 ES2/ SA2/ SS2 SX2 EX2 SE API No. 32-bit instruction Continuity condition Discontinuity condition 281 FAND= S 1=S 2 S 1≠S 2 282 FAND> S 1>S 2 S 1≦S 2 283 FAND< S 1<S 2 S 1≧S 2 284 FAND<> S 1≠S 2 S 1=S 2 285 FAND<= S 1≦S 2 S 1>S 2 286 FAND>= S 1≧S 2 S 1<S 2 FAND F1.2 D0 SET Y21