Delta DVP-ES2 — 5.3 The Operation of STL Program

5. Sequential Function Chart OUT Sn Used for returning to the initial step in the same step sequence. Also for jumping up/down to non-adjacent steps in the same sequence, or separating steps in different sequences. After the transition, all output from the previous status will be cleared.  Returning to SFC: Ladder diagram: the initial OUT S0 S Jump to another step of step step in the S0 S21 S same S21 X2 Using OUT S24 sequence. X2 S24  Jumping S23 S up/down to non-adjacent S24 OUT S24 S S25 S Return to initial step steps in the Using OUT S0 same S25 X7 S0 X7 sequence. S25 returns to the initial step S0 by using OUT. RET  Separating SFC: Ladder diagram:

steps in S1 OUT S0 Drive the step in different sequence different S sequences. S21 S41 S21 S X2 Using OUT S42 Step sequence initiated by S0 X2 OUT S23 S S42 S42 S1 RET S23 S43 S Step sequence initiated by S1 S42 S Two different step sequence: S0 and S1 S23 returns to initial step S0 by using OUT. S43 returns to initial step S1 by using OUT. S43 S RET 5-7 OUT S0