Delta DVP-ES2 — 7.6 Application Example

7 CANopen Function and Operation 2) The following window will appear where to set up the serial port communication parameters. 3) After setting is finished, click “Network”> “Online” and the “Select communication channel” page appears. 7-27 Item Explanation Default If the equipment connected to computer is Interface DVP10MC11T, select Via Local Port; otherwise, -- select Via PLC Port. COM port The serial port of computer used for communication with DVP-ES2-C.

COM1 Address The communication address of DVP-ES2-C 01 Baud rate The communication rate between computer and DVP-ES2-C 9600 bps Data bits The communication protocol between computer and DVP-ES2-C 7 Parity Even parity Stop bit 1 Mode The communication mode between computer and DVP-ES2-C ASCII Mode