DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming B.2.4 DVP-FEN01 (DVP-EH3 Series Ethernet Communication Card) B-6 DVPEN01-SL Ethernet communication module CR number Attribute Register name Description HW LW #115 R/W MODBUS TCP trigger Setting up whether to send out data in MODBUS TCP mode #116 R/W MODBUS TCP status Displaying current status of MODBUS TCP mode #118 #117 R/W MODBUS TCP destination IP Setting up destination IP address for MODBUS TCP transaction #119 R/W MODBUS TCP data length Setting up the data length for MODBUS TCP transaction #219~#120 R/W MODBUS TCP data buffer Data buffer of MODBUS TCP for storing sending/receiving data #248~#220 - Reserved #251 R Error code Displaying the errors.
See the error code table for more information. #255~#252 - Reserved Symbols “R” refers to “able to read data by FROM instrcution”; “W” refers to “able to write data by TO instrcution”. DVP-FEN01 Ethernet communication card CR number Attribute Register name Description HW LW #0 R Model code The model code of DVP-FEN01 is set by its system, and can only be read. It is H’6151. #1 R Firmware version It adopts the hexadecimal system, and the present firmware version is stored in it. #2~#12 - Reserved #13 R/W Enabling the data exchange Users can set CR#13 to “sending the data” or “not sending the data”.
#16~#14 - Reserved #17 R/W Execution cycle of the data exchange (ms) #18 - Reserved #19 R States of the slaves involved in the data exchange b[0:7] indicate the states of the slaves 1~8 involved in the data exchange. #26~#20 - Reserved #27 R/W Function code for a data exchange mode 0: The function code for the reading of data and the writing of data is “17”. 1: The function code for the reading of data is “03, the function code for the writing of a single piece of data is “06”, and the function code for the writing of multiple pieces of data is “10”. #86~#28 - Reserved #87 R/W IP address setting mode 0: Static IP 1:
DHCP #89 #88 R/W IP address When the IP address is 192.168.1.5, the data in CR#89 is 192.168, and the data in CR#88 is 1.5. #91 #90 R/W Mask address When the mask address is 255.255.255.0 the data in CR#91 is 255.255, and the data in CR#90 is 255.0. #93 #92 R/W Gateway IP address When the GIP address is 192.168.1.1, the data in CR#89 is 192.168, and the data in CR#88 is 1.1.