Delta DVP-ES3 — 6.26.2 Explanation of High-speed Output Instructions

DVP-ES3 Series Programming Manual 2. The mark alignment function is enabled in the ramp-up and target frequency and ramp-down sections. When the mark alignment function is not enabled, set S 1 = 100,000; the output stops after 100,000 pulses.  Green line: signal of mark aligment  Blue line: the actual output speed Case 1: when the mark alignment occurs in the ramp-up section  Green line: signal of mark aligment  Blue line: the actual output speed _6 The operation of the mark alignment (green line: OFF -> ON) begins when the number of pulses is 3000. The target frequency of 10 kHz cannot be reached even if S 6 is 15,000. 6-816