Chapter 6 Applied Instructions Case 2: when the mark alignment occurs in the ramp-up section Green line: signal of mark aligment Blue line: the actual output speed The operation of the mark alignment (green line: OFF -> ON) begins when the number of pulses is 6000. The target frequency of 10 kHz can be reached if S 6 is 15,000. When the mark alignment occurs in the target frequency section Green line: signal of mark aligment Blue line: the actual output speed 6_ The operation of the mark alignment (green line: OFF -> ON) begins when the number of pulses is 50,000. Set S 6 = 15,000; the output stops after 15,000 pulses. 6-817