Chapter 6 Applied Instructions 9. The error codes that ErrCode shows are listed in the following table. 6_ 6-433 Error code Description 16#1400 The module does not support the function. 16#1401 The data stored in the module is illegal or exceeds the allowed range. 16#1402 There is no response from the module; communication timeout occurs. 16#1403 There is no such output axis number in the PU module. 16#1404 The output frequency of the PU module is illegal. 16#1405 The output axis specified by the PU module is outputting data. It is not allowed to specify the output repeatedly.