EA180 Series Servo Drive Users Manual 1st display 2nd display 4.8 Warning and alarm mode Al In any mode, once a warning or alarm occurs, the system will directly enter the warning or alarm mode. At this time, you can temporarily switch to the normal operation mode by pressing the M button (the lower right dot of LED0 flashes to show the difference), but the system will return to the warning or alarm mode if there is no key operation within 10s. A. New warning B. Existing warning, no key operation for 10s after pressing Mod key Normal operating mode Level 2 n - ot The above figure shows the button operation when there is a warning.
In the warning mode, only the warning sign (N-ot) is displayed, and the system will automatically return to normal operation mode after the warning disappears. A. New alarm B. Existing alarm, no key operation for 10s after pressing Mod key Normal 48 y function mode AF-08 M Level 1 1 Level 2 parameter mode S p1-00 1 ˅ ˄ M ˄ ˅ ˅ S p1-02 5000 ˄ M ˄ ˅ ˅ S p9-08 3000 ˄ M ˄ ˅ ˅ S P9-13 100 ˄ M ˄ ˅ S ˅ 00000 1s p9-14 ˄ M ＜ -. 65 2n S Level 1 Or warning MOD disappears operating mode Level 1 Level 2 MOD d1-00 d1-01 d1-02 d1-03 d1-04 Failure and Al017 warning mode ˅ ˄ -134 ˅ ˄ 363 ˅ ˄ 053 ˄ ˅ 00341 . 65 1st display SHIFT 2nd disp