EM500 Open-Loop Vector Control Inverter User Manual shown in Figure 7-12 (b). For external power supply, the required voltage range is 12 - 30 V.
EM500 +24V 24V EM500 +24V 24V +5V Y1.Y2 PLC 继电器 +5V Y1.Y2 PLC COM COM 继电器 + - DC a) Internal Power Supply b) External Power Supply Figure 7-12 Power Supply Mode of Multi-Function Terminal The relay output is provided by the internal E AE B E C relay of inverter; the relay has 1 group of NO TTT Relay E Coil contacts and 1 group of NC contacts; when the selected function is inactive, EB-EC is NC and ETT EA-EC is NO (Refer to Figure 7-13); when the Figure 7-13 Relay Contactor selected function is active, the internal relay coil is powered on, EB-EC is off and EA-EC is on.
Function i Output Active Inactive TTiTT TT TT Level Output Active Inactive TTTT TT TT TTTTT Inactive Active Monopulse Output Pulse Output Width TT TT Figure 7-14 Numeric Output Terminal Level and Monopulse Output TTTTTT Numeric output terminals Y1 and Y2, and relay output terminals R1 and R2 have two output types, level and monopulse (see Figure 7-14). For level output, the function 198 No. Function Range Unit Default Type F03.05 Output Signal Type D7 D6 D5 D4 D3 D2 D1 D0 *0000 〇 * * * * R2 R1 Y2 Y1 0: Level 1: Monopulse