EM500 Open-Loop Vector Control Inverter User Manual Energy consumption brake is a brake method by transforming the electric energy generated during the speed reduction into the heat energy of the braking resistor to realize rapid brake. It applies to the brake of large inertia or occasions requiring rapid brake and stop. User needs to choose proper braking resistor and braking unit. See 11.1 Braking Resistor and 11.2 Braking Unit.
Figure 7-39 Energy consumption brake and bus voltage is greater than the operation voltage of Energy consumption brake As indicated in Figure 7-39, when Energy consumption brake is enabled (F15.30=1) (F15.31), Energy consumption brake starts; when bus voltage drops to a value below a certain value, Energy consumption brake is disabled. the energy can be discharged rapidly through braking resistor. Brake duty ratio (F15.32) When inverter is in energy consumption brake, IGBT in the braking unit is on and describes the duty ratio when IGBT is on. The higher the duty ratio is, the higher the brake level will be. 288 Consumption Brake 1:
Enabled F15.31 Energy Consumption Brake Operation Voltage 110.0 - 140.0 (380V, 100.0=537V) % 125.0 (671V) ● F15.32 Brake Duty Ratio 20 - 100 (100 means that the duty ratio is 1) % 100 ●