sinee — 7.17 F16 Group: User Defined Function Parameter

EM500 Open-Loop Vector Control Inverter User Manual Used to specify the phase angle difference between the actual output phase angle and the detection point. 1. If the RST phase angle is detected, the UVW phase angle is adjusted accordingly Used to monitor the current phase Angle error. Phase sequence phase detection related parameters, generally do not adjust 7.17 F16 Group: User Defined Function Parameter 292 No. Function Range Unit Default Type F15.48 Direction of the phase Angle 0: Advanced 1: Lag 0 〇 F15.49 Phase Angle Difference 0~180 ° 0 ● No. Function Range Unit Default Type F15.50 The current phase Angle error -180~180 0 ● No.

Function Range Unit Default Type F15.51 The phase adjusting gain 0.00-600.00 1.00 × F15.52 Phase-locked loop proportional gain 0.00~600.00 0.00 ● F15.53 Phase-locked loop integral gain 0.00~600.00 0.00 ● F15.54 Phase-locked loop filtering time 0.00~100.00 ms 0.50 ● No. Function Range Unit Default Type 0: General models 1: Application of Water supply Industry F16.00 2:Applicationof Air 0 〇 Application compressor 3: Application of Winding rolling