EM500 Open-Loop Vector Control Inverter User Manual The analog output is set to count and length of the output of the offset Settings. analog output F16.11 F16.10 Figure 7-44 Count value and length value analog output 0 F16.01/F16.03 Count value/length value F16.12=0: No Expansion Card No expansion card means that the Inverter does not require a new function provided by the interface card F16.12=1: Clock Card Clock card used in the water supply industry, it can provide timing water supply function F16.12=2: Air compressor interface Card Air compressor interface Card used in Air compressor industry, it can be applied to the provided by SINEE. F16.12=3: Phase sequence phase detection card.
298 F16.10 The percentage of analog output when the count value of zero 0.00~100.00 % 0.00 〇 F16.11 The percentage of analog output when the count value of Designated Count Value 0.00~100.00 % 100.00 〇 No. Function Range Unit Default Type F16.12 EC - A card slot expansion card type 0: No Expansion Card 1: Clock Card 2: Air compressor interface Card 3: Phase sequence phase detection card 0 〇