EM500 Open-Loop Vector Control Inverter User Manual 304 ★ This parameter will be updated in real time only when inverter is in SVC control mode. F18.04 Output Torque Display present output torque of inverter. Range: -200.0 - 200.0. % F18.05 Torque Setting Display present set torque of inverter. Range: -200.0 - 200.0. ★ This parameter will be updated in real time only when inverter is under torque control mode. % F18.06 Output Current Display present output current of inverter. According to motor rated power ratings:
0.00 - 650.00 (Motor Rated Power ≤ 75kW) 0.0 - 6500.0 (Motor Rated Power >75kW) A F18.07 Output Current Percentage Display present output current in the form of percentage (relative to inverter rated current). Range: 0.0 - 300.0. % F18.08 Output Voltage Display present output voltage. Range: 0.0 - 690.0. V F18.09 DC Bus Voltage Display present bus voltage. Range: 0 - 1200. V F18.10 Simple PLC Running Times When auxiliary frequency source B is involved in setting (F00.06≠0), by setting “11:
Simple PLC” (F00.05=11) and the simple PLC running mode is “Limited Times of Cycles” (F08.15=1/2), inverter will display present running times; “0” means that it is the first time, “1” means that it has finished the first time and is running for the second time, and so on. Range: 0 - F08.16. F18.11 Simple PLC Running Stage When auxiliary frequency source B is involved in setting (F00.06≠0), by setting “11: Simple PLC” (F00.05=11), inverter will display present running PLC running stage. Range: 1-15, which corresponds to preset speed 1 (F08.00) – preset speed 15 (F08.14) respectively.
F18.12 PLC Running Time of Present Stage When auxiliary frequency source B is involved in setting (F00.06≠0), by setting “11: Simple PLC” (F00.05=11), inverter will display present running PLC running stage. Range: 0.0 – Corresponding Time Setting (for example the time of preset speed is determined by F08.20). s / min F18.13 Not Used