EM500 Open-Loop Vector Control Inverter User Manual Function codes related to the information about the last fault: Function codes related to the information about the last two faults: 308 at Fault at the last fault. F19.02 Output Current at Fault Used to display output current at the last fault. A 0.00/0.0 × F19.03 Bus Voltage at Fault Used to display bus voltage at the last fault. V 0 × F19.04 Running Mode at Fault Used to display the running status at the last fault. See Table 7-23 Running Modes at Fault 0 × F19.05 Working Time at Fault Used to display the working time at the last fault. h 0 × No. Function Range Unit Default Type F19.06 Last Fault Type Display the last fault type.
See Table 7-22 Fault Types. 0 × F19.07 Output Frequency at Fault Display output frequency at the last fault. Hz 0.00 × F19.08 Output Current at Fault Display output current at the last fault. A 0.00/0.0 × F19.09 Bus Voltage at Fault Display bus voltage at the last fault. V 0 × F19.10 Running Mode at Fault Used to display the running status at the last fault. See Table 7-23 Running Modes at Fault 0 × F19.11 Working Time at Fault Used to display the working time at the last fault. h 0 × No. Function Range Unit Default Type F19.12 Types of Last Two Faults Display the types of the last two faults.
See Table 7-22 Fault Types 0 × F19.13 Output Frequency at Fault Display output frequency at the last two faults. Hz 0.00 × F19.14 Output Current at Fault Display output current at the last two faults. A 0.00 /0.0 × F19.15 Bus Voltage at Fault Display bus voltage values at the last two faults. V 0 × F19.16 Running Mode at Fault Used to display the running status at the last two faults. See Table 0 ×