EM500 Open-Loop Vector Control Inverter User Manual F25.02 / F25.03 is used to limit the upper and lower limit of the function code setting 313 F00.02 Start/Stop Control 1. Terminal Control F00.05 Auxiliary Frequency Source B Options 10:Integral of air compressor PID F00.06 Frequency Source Options 1: Auxiliary Frequency Source B F00.14 Acceleration Time 1 1.00s F00.15 Deceleration Time 1 1.00s F00.21 Reverse Control 1: Prohibit Reverse F02.02 X3 9. Coast to Stop F02.05 X6 112: Switch The Pump F02.06 X7 110: External Overpressure Signal F03.00 Y1 7.Inverter Fault F03.01 Y2 59: Dormancy command F03.02 R1 63: H Pump Control F03.03 R2 64: I Pump Control F04.19 Stop Mode 1:
Coast-to-Stop F07.28 Stall fault detection time 0.0s F09.00 PID Setting Source 1:AI1 F09.02 PID Feedback Source 2:AI2 F09.21 PID Setting Variation Time 1.000s F16.12 EC - A card slot expansion card type 1. Clock Card No. Function Range Unit Default Type F25.02 Upper Limit Pressure F25.03~F09.03 % 100.0 〇 F25.03 Lower Limit 0.1~F25.02 % 0.1 〇