sinee — 7.21 F25 Application of water supply basic groups

EM500 Open-Loop Vector Control Inverter User Manual F25.30=0: The normal rotation clock It indicates rotation period function code F25.29, the time counting is set in hours. F25.30=1: Rotation clock Speed Up It indicates rotation period function code F25.29, the time counting is set in minutes. F25.31 Setting time: the rotation takes place when required or less than F25.31 setting time, the rotation function of pump corresponding to digital output terminal function code 60 will be valid. The terminal function becomes inactive after the pump switch is completed. 1 . The pump rotation function is invalid when the backup pump is not set. F25.38=0:

Disabled Inlet pool water level control function is invalid F25.38=1: Using switch quantity detection Inlet pool water level is controlled through the digital input terminal function . F25.38=2: Using analog quantity detection Inlet pool water level is controlled by F25.39 ~ F25.42 set value and the corresponding analog input. 316 rotation function verification 1: Rotation clock Speed Up No. Function Range Unit Default Type F25.31 The timing pump switch signal output time in advance 0.0~1000.0 S 10.0 ● No. Function Range Unit Default Type F25.38 Water Supply Pool the water level measuring function 0: Disabled 1: Using switch quantity detection 2: Using analog quantity detection 0 〇