EM500 Open-Loop Vector Control Inverter User Manual It is used to check the working state of the current inverter After E51 fault occurs, you can check which mechanical part’s maintenance time is up that it leads to the failure. Used to view the frequency of start-up and stop delay time, can be displayed on the upper computer. This function code is used to record the power consumption, not saved in case of power outage. 349 0: Curve 1 1: Curve 2 2: Curve 3 3: Curve 4 No. Function Range Unit Default Type 0: Unloading state Loading and F28.70 1: Loading status 0 × unloading state 2: Dormant state No. Function Range Unit Default Type First place: Oil filter time Second place:
Oil separator time Third place: Air filter time F28.71 Time Error query 00000 × Fourth place: Lubricating oil time Fifth place: Grease time From right to left No. Function Range Unit Default Type Stop delay F28.72 0~60000 s XXX × remaining time Continuous F28.73 no-load running 0~60000 s XXX × time Stop and restart F28.74 0~60000 s XXX × remaining time No. Function Range Unit Default Type The electricity F28.75 0~65535 Mwh XXX × meter: MWh The electricity F28.76 0~65535 KWh XXX × meter: KWh No. Function Range Unit Default Type F28.77 The Running Time 0~60000 h XXX ×