EM500 Open-Loop Vector Control Inverter User Manual When inverter has any fault above, press STOP RESET to reset or use the fault reset terminal to exit the fault status; after the fault is cleared, inverter returns to the function setting status; if the fault fails to be cleared, LED will continue to display present fault data. Check List of Capitalized English Letters Displayed: Check List of Figures Displayed: 9.2 Warning Analysis When the inverter is abnormal, but it is not allowed to stop, LED display will display the corresponding warning code.
The warning occurs and the inverter will perform the corresponding action according to the parameters, and it should deal with security issues as quickly as possible and then stop and check the warning’s reason. Such as "C002" will be displayed flashes when there is a warning. Press to stop the flashes and you can modify the parameters. There is still a warning. The keyboard is not operated within 5s occur warning again if you stop the flashes. 363 A B C D E F G H I l A B C D E F G H I L N O P Q r S T U x Y N O P Q R S T U X Y 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 Warning Warning Warning Causes Warning measures Code Types C001 Not Used