EM500 Open-Loop Vector Control Inverter User Manual ★ The function code cannot be used to change the parameters of “○” property (unavailable to be modified during inverter running), i.e., user may only operate the parameters of “●” property (available to be modified during inverter running). If user tries to modify the “○” property, an error code 1 will be returned. 12.3.3.4 0x08 Diagnosis function code Function code 08 of Modbus offers a series of tests for checking the communication system between client end (master) and server (slave) or checking various internal error statuses in the server. executed test type.
The servo will copy function code and sub-function code in normal This function uses 2-byte sub-function code field in the inquiry to define the response. Some diagnoses can cause a remote device to return corresponding data through the normal response data field. Generally, sending diagnosis function command to a remote device will not affect the user program in remote device. The diagnosis function can not have access to user logic, for example discrete magnitude and register. Some functions can be used to reset the error counter in the resent device. The diagnosis function of our products is mainly line diagnosis (0000) and used for testing normal communication of master and slaves.
The normal response to the inquiry data request should be returning the same data and copying the function code and the sub-function code. Request PDU Response PDU 388 Function Code 1 byte 0x08 Sub-Function Code 2 bytes 0x0000 - 0xFFFF Data 2 bytes 0x0000 - 0xFFFF Function Code 1 byte 0x08 Sub-Function Code 2 bytes 0x0000 - 0xFFFF Data 2 bytes 0x0000 - 0xFFFF